School Purchase Orders
We accept school purchase orders. Please fax in your PO# to 970-484-1198
School Purchase Order Numbers require a fax copy of original P.O. to be sent to our fax number: if you are paying with a credit card, then continue to place the order online.
MSDS sheets can be found on our home page by clicking on the MSDS link.
|
 |
|
CORK BORER BRASS SET/15
Deluxe Cork Borer Set/15
Solid brass construction, with
sizes ranging from 3-21 mm - the
cork borer sizes are stamped on
each piece.
(10-1/2" x 2" x 5-1/2"; 1.2lbs) |
|
CORK BORER SHARPENER, BRASS
Cork Borer Sharpener, with Wooden Handle and Brass Cone |
|
Watch Glass 50MM Fired Edges
|
|
Watch Glass 65MM Fired Edges
|
|
Beakers
Graduated Each beaker is molded from tough translucent,
polypropylene and incorporates raised outer
graduations for ease of reading. These beakers have
a tapered spout, are chemical resistance and are
autoclavable. |
|
TEST TUBE BRUSH
Test Tube Brushes A wide variety to suit all your needs!
It's a good practice to replace your brushes regularly
to prevent scratching your glass laboratory products. |
|
BRUSH BURET
Burette & Pipette Brushes |
|
APRON RUBBERIZED CLOTH
APRON-RUBBERIZED CLOTH
#1050 Apron Size: 36"x27"
#1051 Apron Size: 42"x27"
#1052 Apron Size: 42"x36"
#1053 Apron Size: 46"x36" |
|
Medicine Droppers
Medicine Droppers
Ungraduated, economical droppers.
The bulbs are made from a synthetic material and do not contain latex. |
|
Tape Measure Fiberglass English/Metric
|
|
Safety Pipette Filler
Safety Pipette Filler
This rubber pipette is used to safely draw liquids into a pipette. One valve is used to release air, draw in liquid with another, and the third valve regulates and releases the liquid. |
|
Two Way Burner Stand
This stand is ideal for use with our alcohol burners! The base is made from 3/16" stainless steel rod with a plated steel mesh top. Stand can be used in either high or low positions. |
|
Perforated Goggles - Large
Perforated Goggles
These impact goggles are made from soft vinyl to fit the face comfortably and fit over regular eyeglasses. Perforations prevent fogging and provide protection from particles while offering a wider view of the work area than traditional impact goggles. |
|
Hand Tally
Hand Tally
This hand tally is ideal for various lab applications including taking surveys, counting total drops of liquid and blood samples, and performing laboratory inventory. |
|
Bunsen Burner
Overall height is 5 3/4" with a heavy 3" diameter base. The Bunsen Burner has an adjustable needle valve for easy flame adjustment. Either natural/medium BTU or cylinder/high BTU can be used. |
|
Digital Stopwatch
Digital Stopwatch
This electronic stopwatch comes complete with battery and carrying cord. Featured on this stopwatch are hour, minute, second, calendar display, 24 hour stopwatch, hourly chime, alarm, split time and total time, 12 or 24 hour mode option, and 1/100 second chronograph. Lightweight and easy to operate. |
|
Test Tube Rack
Wooden - 6 tube, 1 row, 24mm |
|
Test Tube Rack
Wooden - 13 tube, 2 tier, 7x20mm, 6x26mm |
|
PLASTIC PETRI DISH 90MMD PK/20
|
|
Plastic Petri Dish, 50mm PK 20
|
|
PLASTIC PETRI DISH 70MMD PK/20
|
|
PENDULUM CLAMP
Pendulum Clamp
For use on support rods to hang weights and pendulums. Each unit has three screw clamps for holding one to three strings with weights, 2" apart. (11" x 1-1/2" x 1-1/2"; .5lb). |
|
PROTOZOA PIPET 2 OZ.
Protozoa Pipette
This glass pipette is 20cm long x
3cm OD, the bulb capacity is 2oz. |
|
PICK - SCOOPS, SS 16.5 CM PK/10
Scoop, Stainless Steel, 16.5 cm length 10pk |
|
Plastic Scoops
Each scoop is made from high-density polyethylene
and individually wrapped. Long handles help to
keep hands away from material. |
|
Specimen Dish
Specimen Dish, Molded Flint Glass, 4-1/2" x 2-3/4" |
|
Specimen Dish
Molded Flint Glass, 8-1/4" x 3-1/4" |
|
Spot Plates
A piece of equipment that you will find multiple uses for! Made of polystyrene and contains twelve 5.7mm depressions. |
|
SPOT PLATE PORCELAIN 6 CAVITY
S pot Plates |
|
Styrofoam Balls
Great for making molecular models! |
|
Rubber Stoppers
- Domestic Brand |
|
ASSORTED STOPPER 48 PCS
Assorted Stoppers, Black Rubber, Domestic |
|
STOPPER #11 SOLID BLK 6/LB
Domestic Brand Black Stopper, 11- 2 hole (for Automatic Burettes) |
|
STOPPER 12 SOLID BLK 5/LB
Domestic Brand Black Stopper, 12 Solid, |
|
SPECTROMETER ADVANCED
Advanced Spectrometer
Designed for easy set-up and use. This specrometer's sturdy iron base
incorporates a 20cm-diameter divided table with highly visible etched
graduations and a Vernier scale that can be read to a resolution of 1
minute of arc. The revolving 7cm-diameter prism support rotates 360
degrees and has a height adjustment of 2cm, thereby accommodating
a wide range of test conditions. A built-in illuminated auto collimator
eliminates the difficulty of telescope-collimator alignment. Accessories
include an illuminated magnifier, glass diffraction grating and holder, autocollimation
mirror, power adapter, brush, screwdrivers, extra bulbs, and
instruction manual. |
|
SPECTROMETER BASIC
Basic Spectrometer
Great for high school laboratories - a perfect device for any intermediate-level
classroom! Built from sturdy metal, this unit includes an adjustable collimator tube,
telescope, and prism stand. It provides a high quality optical system and an easyto-
read etched scale, which allows the student to measure spectrum lines with
a resolution of 50A. Light is directed in the collimator tube and focused to the
adjustable telescope, which has a scale inside to allow special lines to be reliably
measured. Includes a 600-line millimeter diffraction grating, grating holder, 3x2.5cm
equilateral glass prism, prism hood, which helps block stray light from entering the
spectrometer, and instruction manual. |
|
TANGENT GALVANOMETER
Tangent Galvanometer
This small, compact tangent galvanometer provides an uncomplicated method for studying direction and magnitude of magnetic fields! It also demonstrates that deflection of a magnetic needle is proportional to current, thus becoming a simple way for students to understand the internal workings of meters. The unit is constructed on an attractive black acrylic base. Requires a 1.5-volt DC power source. Includes: instruction manual, compass and connector cords. (7" x 5" x 7"; .5Ib). |
|
Dessicator and Plate
Desiccators allow one to store equipment in a low-humidity atmosphere. The heavy glass desiccators are made from quality annealed glass for durability. It includes a glazed porcelain sample plate with a 5mm center hole that is held over the desiccant. For an airtight seal, apply grease to the internal edges of the flange, press the lid on and rotate at least 360 degrees. |
|
STAINING DISH
High-quality dishes for easy staining! These staining dishes holds standard 1" x 31" microscope slides. The jars are made from thick annealed glass with slots molded into the glass. Each slot is designed to hold two slides back to back. These staining dishes holds standard 1" x 3" microscope slides. The jars are made from thick annealed glass with slots molded into the glass. Each slot is designed to hold two slides back to back. |
|
Cylinders - Single Scale
Each cylinder is molded from tough translucent
polypropylene and incorporates raised graduations for
easy reading. These cylinders are autoclavable and
have a broad base for stability. |
|
36 PIECE GLASSWARE KIT
If you don't want to waste time searching for all the essential glassware pieces you need, here is a 36 piece selection of borosilicate laboratory glassware. Includes:
- 1 - Griffin beaker 50ml
- 2 - Griffin beaker 250ml
- 1 - Griffin beaker 600ml
- 1 - Erlenmeyer flask 50ml
- 2 - Erlenmeyer flask 250ml
- 1 - Erlenmeyer flask 500ml
- 6 - medicine droppers
- 6 - stir rods 6
- 1 - cylinder 10ml
- 1 - cylinder 100ml
- 1 - serological pipette
- 12 - test tubes 16x150mm
- 1 - short stem funnel
|
|
Connecting Tubes
Great for connecting hoses - the constricted ends of the hose connectors will hold the tubing securely in place! |
|
Connecting Tubes
Great for connecting hoses - the constricted ends of the hose connectors will hold the tubing securely in place! |
|
Clay Triangles
These clay triangles are the perfect tool for heating crucibles! The galvanized iron wires help prevent premature rusting, and the clay tube
coverings are uniform in size. |
|
Vacuum Plate
The 1/2" thick vacuum plate was designed to fit any jar 8-1/2" O.D. or smaller. A rubber gasket is also included. 9" outside diameter. |
|
Vacuum Container with Integrated Pump
This portable and versatile self-contained unit consists of a strong, transparent plastic jar, a depression manometer with scale down to 600mm Hg, double-clousing valve, and perforated vacuum plate with a rubber gasket, and a hand-driven air pump. |
|
VACUUM PLATE 10.5 X 10.5 in
Vacuume Plate 10.5" - Designed specifically to fit any jar 10 inches or smaller. |
|
Hand Vacuum Pump
Supplied with or without a pressure gauge that reads in both centimeters & inches of mercury. Pumping rate is 15ml per stroke, and will displace up to 725 ml of air. Fitted with a valve to release the vacuum without d is connecting the pump. |
|
Barnes Droppers
Replacement droppers that will fit the Ginsberg #7-207 Barnes Bottles |
|
Barnes Bottles
Clear, square bottles with medicine-dropper lids and narrow mouths. |
|
BURETTE
A high-quality borosilicate glass burette with a
Teflon stopcock. Perfect for students. |
|
Automatic Burettes
Automatic Burettes with Ground Glass Stopcocks & Clear Storage Container Ideal for storing and dispensing standard solutions. Includes:
- clear or amber reservoir bottle
- rubber stopper
- borosilicate, permanently graduated self-leveling burette
- rubber atomizer bulb
- glass tube connector Numbered every
1ml with .1ml subdivisions |
|
AUTO BURET 25ML W/STOP AMB BTL
Automatic Burettes with Ground Glass
Stopcocks and Amber Storage Container
Numbered every 1ml with .1ml subdivisions |
|
Automatic Burettes with Stopcocks
Stopcocks - Replacement Tube Only
Numbered every 1ml with .1ml subdivisions |
|
BEND W/ARM 2 1/2X2 1/2 X 8MM
Glass Connector, Bend 2x2, (for Automatic Burettes) |
|
Glass Burette
A high-quality borosilicate glass burette with a
Teflon stopcock. Perfect for students because the
stopcock is almost freeze-proof! |
|
AUTO BURET 25ML W/PINCH CLEAR
Automatic Burettes with Burette Tip
Assembly and Clear Storage Container
Numbered every 1ml with .1ml subdivisions |
|
AUTO BURET 25ML W/PINCH AMBER
Automatic Burettes with Burette Tip
Assembly & Amber Storage Container
Numbered every 1ml with .1ml subdivisions |
|
AUTO BURET 10ML W/PINCH CLAMP
Automatic Burettes with Burette Tip
Assembly - Replacement Tube Only
Numbered every 1ml with .1ml subdivisions |
|
Flint Bottles
French Square, without Dropper
Assembly or Cap Clear, square, open-top bottles. |
|
Dropper Bulbs
To be used with pipettes and syringes! |
|
Test Tube Racks
A great space-saver that can also act as an extra pair of hands during experiments! Racks hold varying numbers of test tubes; wooden or plastic. |
|
Watch Glass
Catches the condensed evaporating liquid from beakers, and allows it to drop back into the container. Highly chemically durable, to prevent contamination. Made from soda-lime glass, with polished edges. Because the watch glasses are made from soda-lime glass, we do not recommend placing them in direct contact with a heat source. |
|
Wood Splints
Helpful for demonstrating oxygen's presence and support of combustion. Also great as applicators and markers in planting. Thin and economical. |
| | |
